Solenoid of tram switches

The solenoid of tram switches (solenoid) is designed to ensure the movement of the rods of the solenoid type switch drive.

Leave a request

By submitting the form, I agree with rules

Your message was sent successfully!

We will contact you as soon as possible.

Error!

Failed to send your message.

The solenoid of tram switches (solenoid) is designed to ensure the movement of the rods of the solenoid type switch drive. The solenoid provides linear movement of the ferromagnetic core when converting the electric current passing through the coil into a mechanical pulling force.

Solenoids are installed directly in the switches of tram tracks.

The solenoid design provides protection for the IP67 solenoid coil and the IP44 solenoid mechanism according to GOST 14254-96.

In terms of resistance to the effects of climatic factors, the resin corresponds to the climatic version – U, category 1 according to GOST 15150-69. 

The average service life is at least 10 years.


Overall dimensions of the core:

  • Length 268 mm
  • Diameter 62 mm
  • Weight 5.5 ± 0.3 kg

Overall dimensions of the solenoid:

  • Length 427 mm
  • Diameter 220 mm
  • Weight not more than 50 kg

 

Maximum core stroke: от 50 мм до 60 мм
Maximum force, along the axis of the core: 1500 N до 2000 N
Operating voltage range of the coil power supply: from 400 to 900 V DC
Rated coil current: less than 18 A
Rated voltage of the solenoid coil power supply: 600 V DC
The active resistance of the solenoid coil: 55±3 Оm
The duration of the supply voltage of 600 V DC to the coil: no more than 3 seconds
Type of electric motor Power, W Supply voltage, V The strength of the electric current, A Rotation speed,
rpm
Transfer time at a load of 3500 N,
s
МSА-0,3 300 200 2,2 850 4,6
МSА-0,5 500 200 2,5 1350 4,7

Other products

Search