Jumper fixation set
The jumper fi xation set is installed on a reinforced concrete sleeper and intended for fi xation of live parts of jumpers (couplers).
The jumper fi xation set is installed on a reinforced concrete sleeper and intended for fi xation of live parts of jumpers (couplers).
The jumper fi xation sets depending on coupler types are produced in several versions.
ADDITIONAL PARAMETERS
- The set design enables to fi x from 1 to4 jumper wires on a sleeper at the same time.
- The fi xation structure uses dielectric materials ensuring insulation resistance under the normal climatic conditions: minimum 5 megohm, at air humidity 100% and air temperature 25°C: minimum 0.5 megohm.
- Set weight is maximum 20 kg.
- Climatic version: UKhL 1 per GOST 15150-69.
The jumper fi xation sets depending on coupler types are produced in several versions.
ADDITIONAL PARAMETERS
- The set design enables to fi x from 1 to4 jumper wires on a sleeper at the same time.
- The fi xation structure uses dielectric materials ensuring insulation resistance under the normal climatic conditions: minimum 5 megohm, at air humidity 100% and air temperature 25°C: minimum 0.5 megohm.
- Set weight is maximum 20 kg.
- Climatic version: UKhL 1 per GOST 15150-69.
| Designation | Coupler types and wire section |
| YUKLYA.301539.005 | SDT, SSP; 120 mm² |
| YUKLYA.301539.005-01 | SPYa; 35 mm² |
